Fastener Tightening Specifications
WARNING: This page is about a different car, the 2013 Audi A8, 2012 Audi A8, and 2011 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Brake rotor cover plate to wheel bearing housing bolt, PR-1LN and 1LP | - | 10 |
| Brake rotor to wheel hub bolt | ||
| - Front, PR-1LL and 1LM | - | 9 |
| - Front, PR-1LN and 1LP | - | 5 |
| - Rear | - | 5 |
| Brake pedal mounting pin bolt | - | 8 |
| Electromechanical parking brake control module nut | - | 10 |
| Electromechanical parking brake motor to rear caliper bolt | - | 12 |
| Front brake line | ||
| - to brake hose | - | 12 |
| - to brake caliper | - | 19 |
| Front brake caliper guide pin, PR-1LL and 1LM | - | 55 |
| Front brake caliper to wheel bearing housing bolt, PR-1LN and 1LP | - | 196 |
| Front brake carrier bolt, PR-1LL and 1LM 1 | - | 196 |
| Gas pedal module to mounting bracket bolt | - | 8 |
| Mounting bracket nut | - | 8 |
| Mounting bracket to steering bolt | - | 20 |
| Rear brake caliper to guide pin bolt 1 | - | 35 |
| Rear brake carrier bolt 1 | - | 100 + 90° turn |
| Rear brake hose | ||
| - to brake pipe | - | 12 |
| - to brake caliper | - | 19 |
| Rear brake hose bracket bolt | - | 10 |
| Trim and balance spring to front brake caliper bolt, PR-1LL and 1LM | - | 22 |
- 1 Always replace after removal.