Special Tools

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools -- Bonded Rubber Bushing In Transmission Carrier, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Press Plate: VW402
Press Piece - Multiple Use: VW412
Press Piece - Bushing - 50mm Diameter: VW432
Base Block: VW441
Press Piece - Reverse Gear Syncro: 3296
Gearbox Carrier Mounting Assembly Tool: T10214

Fig 2: Identifying Special Tools -- Transmission Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Transmission Support: VW785/1B
Bearing Installer - Multiple Use: 3062
Transmission Support: 3282
Engine and Gearbox Jack: VAS6931

Special tools and workshop equipment required

Puller - Unit Injector: T10055 with Puller - Unit Injector - Adapter 2: T10055/2

Fig 3: Identifying Puller T10055
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Engine/Gearbox Jack - Gearbox Support: T10337

Fig 4: Engine/Gearbox Jack - Gearbox Support T10337
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Seal Installer - Hollow Shaft: T10380

Fig 5: Identifying Thrust Piece - T10380-
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Seal Installer - Inner Output Shaft: T10399

Fig 6: Identifying Assembly Tool T10399
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Seal Installer - Flange Shaft: T10449

Fig 7: Identifying Thrust Piece T10449
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Shop Crane: VAS6100
Inductive Heater: VAS6414

Fig 8: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Puller - Multiple Use: VW391

Fig 9: Puller - Multiple Use VW391
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Engine/Gearbox Support Shackle (2 pc.): 10-222A/12

Fig 10: Identifying Shackle 10 - 222 A/12
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Used Oil Collection and Extraction Unit: SMN372500
Seal Installer - Input Shaft: T10448
Seal Installer - Flange Shaft: T10450