ATF Cooler, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the subframe crossbrace. Refer to Subframe Crossbrace, Removing and Installing .
CAUTION:
The suspension components could be damaged.
- Do not rest the vehicle on its wheels if the subframe mount, the steering gear or the subframe crossbrace are not installed correctly.
-- Place the Used Oil Collection and Extraction Unit:SMN372500 under the transmission.
Vehicles through MY 2014
-- Remove the clamps -1 and 4- and disconnect the ATF pipes.
-- Loosen the clamps -2 and 3- and then seal off and remove the coolant hoses Hose Clamps - Up To 25mm:3094 .
-- Remove the bolts -arrows- and remove the ATF cooler.