Rear Peripheral Camera -R246-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Installation is identical in reverse order of removal.
-- Close the rear lid.
If replaced, the Rear Peripheral Camera -R246- must be programmed again prior to calibrating.
Use the Vehicle Diagnostic Tester
-- Perform a calibration. Refer to PERIPHERAL CAMERA, CALIBRATING .