Peripheral Camera Control Module -J928- CONNECTOR ASSIGNMENT: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Peripheral Camera Control Module J928

Fig 1: Identifying Peripheral Camera Control Module -J928-

Courtesy of AUDI OF AMERICA, LLC

18-Pin Connector -T18f-
CVBS OUT, 2-Pin Connector -T2lt- to the Information Electronics Control Module 1 -J794-
CVBS input, 5-Pin Connector -T5av- from the Left Peripheral Camera -R244-
CVBS input 5-Pin Connector -T5aw- from the Right Peripheral Camera -R245-
CVBS input, 5-Pin Connector -T5ax- from the Front Peripheral Camera -R243-
CVBS input, 5-Pin Connector -T5ay- from the Rear Peripheral Camera -R246-

NOTE:

Unlisted connector terminals are not used.

1 - 18-Pin Connector T18F

Fig 2: 1 - 18-pin connector (T18f)

Courtesy of AUDI OF AMERICA, LLC

1 - Terminal 30

2 - CAN bus high,

10 - CAN bus low, Comfort

12 - Terminal 31