Routing And Securing Lines
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- To avoid mistakes and to remember the original installation location, mark the lines/hoses for fuel, hydraulics, vacuum, Evaporative Emission (EVAP) system or electrical wires before removing. If necessary, make a sketch or take a picture.
- To prevent damaging the lines, make sure there is sufficient clearance in the engine compartment for all moving or hot components because of space limitation.
- Check the routing of the refrigerant lines after attachment. They must be inserted into the provided brackets and must not come in contact with other components.