Information Electronics Control Module 1 -J794-, Removing And Installing: Removing
-- Remove any CDs still in the Information Electronics Control Module 1 -J794-.
-- Insert the two clips from the Radio Removal Tool :T10057 into the slits in the Information Electronics Control Module 1 -J794- -1- until they lock into place. Points on the grip eyelets of tool face outward.
-- Pull Information Electronics Control Module 1 -J794- -1- out using the handles on the Radio Removal Tool :T10057 from the instrument panel.
-- Release and disconnect the connectors from the Information Electronics Control Module 1 -J794-.
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps :VAS6223/9 -1- onto the MOST bus connector -2-.
-- Press the release tabs on the Information Electronics Control Module 1 -J794- and remove the Radio Removal Tool :T10057 .