Oil Cooler, Removing And Installing: Installing: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following:

Note the installation position of the bracket -1- on the oil cooler.

Fig 1: Identifying Tabs -Arrows- On Bracket -1- And Bolt -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The tabs -arrows- on the bracket -1- must face forward toward the oil cooler.

-- Install the bracket -1- using the bolt -2-.

-- Slide the intake and return hoses onto the bracket -1- as far as the stop.

NOTE:

Secure all hose connections with hose clamps appropriate to the model. Refer to the Parts Information.

For the correct type of power steering fluid. Refer to the Parts Information.

-- Check the hydraulic fluid level and fill if necessary. Refer to the appropriate service information.

-- Bleed the steering system and check for leaks. Refer to POWER STEERING SYSTEM, BLEEDING .