Front Differential Assembly: Installation
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install the differential side retainers using ST.
ST 18630AA010 WRENCH COMPL RETAINER
- Install the bearing outer race to the transmission case.
- Install the front differential assembly.NOTE: Be careful not to fold the sealing lip of oil seal.
- Install the main shaft assembly for single-range. < Ref. to INSTALLATION , Main Shaft Assembly for Single-Range. >
- Install the drive pinion shaft assembly. < Ref. to INSTALLATION , Drive Pinion Shaft Assembly. >
- Install the transmission case. < Ref. to INSTALLATION , Transmission Case. >
- Install the transfer case together with the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
- Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >