Confirmation Of Current Setting
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- On << Main Menu >> display, select {Each System Check}.
- On << System Selection Menu >> display, select {Integ. unit mode}.
- On << Integ. unit mode failure diag. >> display, select {Current Data Display & Save}.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
- Display the following item and record the settings.
Required items for new registration (Except for system not equipped)
REGISTRATION ITEMS REFERENCE CHART
| Item | Item to confirm | Remarks | |||
|---|---|---|---|---|---|
| number of regist. | 1 | 2 | 3 | 4 | Registered ID type |
| Off delay time | OFF | Long | Normal | Short | Setting for lighting off time |
| Rr Defogger op. mode | Normal | Continuous | |||
| Security Alarm Setup | ON | OFF | |||
| Impact Sensor Setup | ON | OFF | Option setting | ||
| Alarm delay setup | ON | OFF | |||
| Lockout prevention | ON | OFF | |||
| Impact sensor | support | no support | Option setting | ||
| Buzzer beeping setup | ON | OFF | |||
| Emergency light setup | ON | OFF | |||
| Buzzer setting | support | no support | |||
| Passive Alarm | ON | OFF | |||
| Door open warning | support | no support | |||
| Dome Light Alarm Setting | ON | OFF | |||
| Map Light Setting | ON | OFF | |||
| Belt Warning Switch | ON | OFF | Switch the belt warning lighting and the buzzer sound. | ||
| Map lamp 30 sec off record | support | no support | |||
| A/C ECM setting | support | no support | Model with auto A/C | ||
| wiperdeicer | support | no support | Option setting | ||
| Sedan/Wagon Setting | Sedan | Wagon | |||
| MT/AT Setting | AT | MT | |||
| 6MT Setting | 6MT | Other than 6MT | |||
| Factory initial setting | Factory | Market | Do not change to factory mode. | ||