Fuel Level Sensor 2 -G169-, CHECKING: Procedure

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the left front seat all the way forward.

-- Remove the rear bench seat. Refer to .

-- Fold the insulation mat near the locking flange cover to the side.

-- Remove the bolts -arrows- and the locking flange cover.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2- from the locking flange.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore item -1-.

CAUTION:

There is the risk of incorrect measurements.

When measuring the resistance values at "fuel tank empty", an inaccurate measurement, can occur because there may be some fuel left in the other chamber. The remaining fuel must be extracted after opening the locking flange in order to attain the following measured values. Refer to Fuel Level Sensor 2 -G169-, REMOVING AND INSTALLING .