Power Window Control Switch: Removal: Sub-Switch

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window switch panel.

Fig 1: Locating Power Window Switch
Courtesy of SUBARU OF AMERICA, INC.
1. Open the cover and remove the screws.
2. Lift up the tip of switch panel by using a plastic remover.
  
  Fig 2: Switch Panel Tip
  Courtesy of SUBARU OF AMERICA, INC.
3. Disengage the end face tabs by using a plastic remover.
  
  Fig 3: Disengaging End Face Tabs Using Plastic Remover
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the power window switch panel.
Disconnect the sub-switch connector.
Remove the screws to remove the power window sub-switch assembly.