Main Switch

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the power window switch panel.

Fig 1: Locating Power Window Switch
Courtesy of SUBARU OF AMERICA, INC.
1. Open the cover and remove the screws.
2. Lift up the tip of switch panel by using a plastic remover.
  
  Fig 2: Switch Panel Tip
  Courtesy of SUBARU OF AMERICA, INC.
3. Disengage the end face tabs by using a plastic remover.
  
  Fig 3: Disengaging End Face Tabs Using Plastic Remover
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the power window switch panel.
Disconnect the main switch connector.
Remove the screws to remove the power window main switch assembly.