Seat Armrest - Second Row: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: Make sure the armrest pivot guide pin on the seat backrest is lined up to the armrest pivot guide pin slot on the armrest.

With the armrest in the horizontal position, install the armrest onto the seat and start the armrest pivot bolt by hand.

2.

NOTE: Make sure the backrest cover is not pinched between the armrest spacer and the armrest bracket.

Tighten the armrest pivot bolt to 45 Nm (33 lb-ft).

3.

Position the armrest cover back onto the armrest.

4.

Zip the armrest cover and tuck the zipper up into the armrest cover zipper pocket.