Coolant Crossover Manifold Assembly: Installation
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 2.
Install the coolant crossover manifold and the bolts.- Stage 1: Tighten to 10 Nm (89 lb-in).
- Stage 2: Tighten an additional 45 degrees.
- 4.
Install the Intake Manifold. For additional information, refer to Engine 3.5L GTDI .
- 5.
Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding .