LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1013 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder - Functional >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Lock Cylinder - Functional: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Make sure the ignition lock cylinder is in the ACC position.

  1. 2.

    Insert the ignition lock cylinder into the ignition lock cylinder access hole located on the steering column.
    • Make sure to align the locking pin with the locking pin access hole.

  1. 3.

    Install the Passive Anti-Theft System (PATS) transceiver. Refer to Anti-Theft Passive Anti-Theft System (PATS) .

  1. 4.

    Rotate the ignition key through all lock cylinder positions to check for correct operation.
scientia non olet · About LEMON Manuals