Engine Speed Sensor -G28-: Removing

WARNING: This page is about a different car, the 2014 Audi A8 Quattro and 2013 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-. Refer to "Underbody Trim Panels" in NOISE INSULATION, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

Fig 2: Engine Speed Sensor -G28-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and remove the Engine Speed (RPM) sensor -G28-.