LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf Limited Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 1686 (Engine Assembly [CDTA,CDTB,CLAB,CMHA,CPNA,CTBA,CTBB,CDTC,CPNB,CTBD]) >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine, Securing On Engine And Transmission Holder
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine, Securing On Engine And Transmission Holder

WARNING: This page is about a different car, the 2016 Audi A8 Quattro and 2015 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Procedure 

-- Attach the :VAS6101  to the :VAS6100  .

Fig 1: Identifying Engine Assembly Lift Tools
GWWA10-11231Courtesy of AUDI OF AMERICA, LLC

-- Engage the :3033  on the engine lifting eyes and on the shop crane as shown in the illustration.

-- Tension engine slightly with shop crane, do not raise.

-- Version 2 of electrohydraulic engine mount solenoid valves only: Disconnect the left and right connector -3- from the Left Electrohydraulic Engine Mount Solenoid Valve -N144- / Right Electrohydraulic Engine Mount Solenoid Valve -N145-.

Fig 2: Disconnecting Left And Right Connector -3- From Left Electrohydraulic Engine Mount Solenoid Valve - N144- / Right Electrohydraulic Engine Mount Solenoid Valve - N145-
GWWA10-11283Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore items -1 and 2-.

-- Remove the left and right bolt -2- from the engine mount.

Fig 3: Identifying Bolts
GWWA10-11282Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore item -1-.

-- Remove the :VAS6131/13-7  from the engine.

Fig 4: Identifying Articulated Joint Support VAS 6131/13-7
GWWA10-11335Courtesy of AUDI OF AMERICA, LLC

-- Raise engine from engine carrier.

-- Free up the wires.

Fig 5: Identifying Bolts
GWWA10-10883Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the left engine support.

-- Remove the bolts -arrows- and the right engine support.

Fig 6: Removing Nut And Freeing Up Ground Wire
GWWA10-10884Courtesy of AUDI OF AMERICA, LLC

-- Secure the starter on the engine.

NOTE:

Ignore item -1-.

-- Secure the engine to the :VAS6095  using the :VAS6095/1  and :VAS6095/1-11  and tighten to 40 Nm, as illustrated.

Fig 7: Identifying Engine Stand Assembly
GWWA10-11322Courtesy of AUDI OF AMERICA, LLC