Data Bus On Board Diagnostic Interface -J533-, CONNECTORS
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
32-pin connector -A-
- LIN bus 2
- CAN Bus Low (extended)
- CAN Bus Low (diagnosis)
- CAN Bus Low (Comfort)
- CAN Bus Low (drivetrain)
- CAN Bus Low (instrument cluster)
- FlexRay bus ground channel 1
- FlexRay bus ground channel 2
- FlexRay bus ground channel 3
- FlexRay bus ground channel 4
- FlexRay bus ground channel 5
- FlexRay bus ground channel 6
- Ground "-" (terminal 31)
- Terminal 15
- Not Assigned
- Battery "+" (Terminal 30)
- LIN bus 1
- CAN Bus High (extended)
- CAN Bus High (diagnosis)
- CAN Bus High (Comfort)
- CAN Bus High (drivetrain)
- CAN Bus High (instrument cluster)
- FlexRay bus positive channel 1
- FlexRay bus positive channel 2
- FlexRay bus positive channel 3
- FlexRay bus positive channel 4
- FlexRay bus positive channel 5
- FlexRay bus positive channel 6
- Ground "-" (terminal 31)
- Instrument cluster prompt wire
- Not Assigned
- MOST ring break diagnosis
Optical MOST-Bus connection (fiber optic) -B-
- MOST bus input
- MOST bus output