Parameter Check

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The parameter data registered in the VDCCM is shown on the display.

Connect the Subaru Select Monitor.
On the << Main Menu >> display, select {Each System Check}.
On the << System Selection Menu >>, select {Brake Control System}.
Click the [OK] button after the {VDC} is displayed.
On the << Brake Control Diagnosis >>, select {Confirm on parameter}.
On the {Confirm on parameter} display screen, check that the applied model and grade of the target vehicle are included, and click the [OK] button.
If the applied model and grade of the target vehicle are not included on the {Confirm on parameter} display screen, perform parameter selection and registration. < Ref. to PARAMETER SELECTION , OPERATION, Subaru Select Monitor. >