Instrument Cluster -KX2-, REMOVING AND INSTALLING: Notes
Special tools and workshop equipment required
- Torque Screwdriver :VAG1624
NOTE:
All indicator lamps in the Instrument Cluster -KX2- have LEDs. LEDs cannot be replaced separately if faulty. The instrument cluster must be replaced.
Do not disassemble the Instrument Cluster -KX2-.
It is not necessary to remove the steering wheel in order to remove the Instrument Cluster -KX2-.
If the Instrument Cluster -KX2- is replaced with the Instrument Cluster Control Module -J285-, select the "Replace" function for the corresponding control module in "Guided Fault Finding" or "Guided Functions" mode using the Vehicle Diagnostic Tester.
General Description:
The following components are integrated inside the Instrument Cluster -KX2- :
- Instrument Cluster Control Module -J285-
- Fuel Gauge -G1-
- Speedometer -G21-
- Engine Coolant Temperature Gauge -G3-
- Tachometer -G5-
- Indicator lamps