Shift Mechanism, Servicing: Installing: Notes
NOTE:
Lubricate the bearing areas and the sliding surfaces. Refer to the Parts Information for the grease allocation.
The cable retainer must be behind the catch -arrow 2-.
-- Install the clip -arrow 1- and make sure it is locked into place.
- The cable retainer may be removed only when the selector relay lever is removed. Refer to With the selector relay lever removed: pry the selector cable retainer out of the selector relay lever. .
-- Press the cable retainer on the selector relay lever. Refer to Installing the Cable Retainer .
-- Install the selector relay lever together with the cable retainer all the way in.
- The clip -arrow 1- secures the selector relay lever.
- Make sure the clips locks securely.
- The cable retainer must be behind the tab -arrow 2- (→ previous illustration).