Selector Mechanism, Removing And Installing: Removing: Notes
-- Disconnect the battery. Refer to BATTERY [For engine(s) CYFB] .
-- Remove the boot with the gearshift knob and, if necessary, remove the noise insulation from the center console frame as well. Refer to appropriate service information. .
Scirocco
-- Remove the footwell trim panel from the center console and the ashtray or storage compartment and then remove the center console. Refer to STORAGE COMPARTMENTS AND COVERS .
Golf Convertible
-- Remove the ashtray or storage compartment from the center console. Refer to CENTER CONSOLE .
The footwell rear channel is located above the nut for the center console on some vehicles:
-- Remove the center console. Refer to CENTER CONSOLE .
-- Remove the rear channel footwell. Refer to appropriate service information. .
-- Remove the center console securing bracket nuts. Refer to CENTER CONSOLE .
-- Remove the nuts from the gearshift housing. Refer to Installed position of gearshift housing nuts arrows. .
-- Lower the gearshift housing.
- If it is not possible to lower the gearshift housing, then the nuts on the gearshift housing are located under the bracket on the center console.
- Then remove the center console securing bracket. Refer to CENTER CONSOLE .
If the center console bracket cannot be removed separately:
-- Remove the center console. Refer to CENTER CONSOLE .
CC and Passat
-- Remove the center console. Refer to CENTER CONSOLE .
CC, Passat, Golf Cabriolet, Scirocco