Engine And Transmission, Separating, Vehicles With DSG Transmission: Procedure
- Engine/transmission assembly removed and secured on the :T10359 .
-- Remove the starter. Refer to STARTER .
-- Remove the nut -arrows- , and remove the front bracket from the transmission fluid pan.
The threaded bolts are welded to the front of the oil pan.
-- Disconnect the connector -2- .
Place a cloth underneath to catch any escaping coolant.
-- Loosen the hose clamps -arrows- , remove the coolant hoses from the transmission fluid cooler.
-- Remove the bolts -1- and set aside the Transmission Coolant Valve -N488- .
-- Seal the open lines and connections with clean plugs from the :VAS6122 .
-- Attach the :2024A hooks to the transmission lifting eyes and secure it with the securing pin -arrow- .
-- Hook the :VAS6100 with the :10-222A/20 on the :2024A/1 .
-- Remove the bolts -1 to 8- for the transmission/engine connection.
Ignore -A- .
-- Remove the transmission from the engine.