Transmission Tightening Specifications

Transmission to Engine

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

A manual transmission is shown in the illustration above. The attaching points on the engine are identical.

When removing and installing pay attention to the different bolt lengths.

In necessary the bolt length may differ from position in the illustration.

Item	Bolt	Nm
1	M12 x 55	80
2 ¹⁾	M12 x 155 or M12 x 170	80
3 ²⁾	M10 x 55 or M10 x 65	40
4 ³⁾	M12 x 70	80
A	Alignment sleeves for centering
¹⁾ also secures the starter. ²⁾ the bolt under the starter is M10 x 65 mm ³⁾ are installed from the engine side.

Tightening Specifications

Component	Tightening Specification
Drive plate to torque converter	60 Nm
Selector cable bracket to transmission	8 Nm
Cable bracket to transmission	20 Nm