Power Liftgate Initialization
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Battery power must be removed from the Liftgate/Trunk Module(LTM) for 20 seconds before the LTM enters the initialization mode.
- 3.
If liftgate is not already in the fully closed position, manually close and fully latch the power liftgate.
- 4.NOTE: If the power liftgate does not open during this step, refer to the Symptom Chart in Power Liftgate .
Open the power liftgate by using a RKE transmitter or the front power liftgate switch.