LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2016 >> Tiguan R-Line, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> 2.0L - Fuel Supply - Engine Code: CCTA >> 20 Fuel Supply >> Removal And Installation >> Accelerator Pedal Module >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Module: Removing

-- Remove the steering column cover retainers -arrows- and cover.

Fig 1: Identifying Steering Column Cover Retainers
GWWA20-1085Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry out the cap -3- with a screwdriver.

Fig 2: Identifying Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin
GWWN20-10509Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Disconnect the connector -1- by releasing the lock -arrow-, and then remove the connector from the accelerator pedal module.

NOTE:

For the Tiguan, the release tool must be slightly raised at an angle of approximately 30° and then lightly pushed in.

-- Slide the Accelerator Pedal Module Release Tool T10238 as shown into openings designated for it until it stops, then remove the accelerator pedal module.

Fig 3: Identifying Release Tool T10238
GWWN20-10056Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.