Transmission, Disassembling and Assembling: Notes
Transmission Housing Cover, Transmission Housing, Gearshift Shaft with Gearshift Cover, Input Shaft, Output Shaft, Differential and Gearshift Mechanism, Removing and Installing
Special tools and workshop equipment required
- Holding Plate - VW309-
- or Holding Plate - VW309A-
- Transmission Support - VW353-
- Bearing/Bushing Installer - Multiple Use - VW295-
- Bearing Driver - Multiple Use - VW244B-
- Hot Air Blower - VAG1416-
- Torque Wrench 1331 5-50Nm - VAG1331-
- Bracket - Multiple Use - 30-211A-
- Bearing Installer - Multiple Use - 32-111-
- Assembly Tool Kit - Press Piece 2 - T10030/4- from the Hydraulic Press - Bushing Tool Kit - T10030-
- Press Piece - 37mm - VW416B-
- Puller - Transmission Gears - T10408-
- Puller - Transmission Gears - Thrust Piece - T10408/2-
- Spacer Plate - T10408/3-
- M7 x 35 hex collar bolt and washer (components of the Puller - Transmission Gears - T10408-)
- Support Bridge - T10323-
- Rear Wheel Bearing Kit - Piece 7 - 3253/7-
- Press Piece - Multiple Use - VW433-
- Torque Wrench 1332 40-200Nm - VAG1332-
- -2- Puller - Kukko Puller - 60-150mm Width, 200mm Length - 18/1- (quantity 2)
- Inductive Heater - VAS6414-
- Sealing Compound. Refer to the Parts information.
- M8 x 100 mm stud bolt