Vehicle Electrical System Control Module -J519- BRACKET, REMOVING AND INSTALLING: Removing

-- Disconnect the Battery -A-. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the instrument panel. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .

-- Cut the cable tie -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the fuse panel C and press aside. Refer to RELAY AND FUSE CARRIER BEHIND INSTRUMENT PANEL ON DRIVER SIDE, REMOVING AND INSTALLING .

-- Release and disconnect the connector from the Front Parking Aid Warning Buzzer -H22-.

-- Release and disconnect the connector on the Vehicle Electrical System Control Module -J519-. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .

-- Release and disconnect the connector on the Parking Aid Control Module -J446- /Parallel Parking Assistance Control Module -J791-.

-- Remove the diagnostic connector, to do this release the locking mechanism on the bracket and remove the bracket outward.

-- Remove the bolts -2, 3, and 6-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the bracket -1- as far as possible out of the central tube until the alignment pins -4 and 5- are disengaged.

-- Cut the cable ties -arrows-.

-- Free up the wiring harness on the mount.

-- Remove the bracket to the vehicle interior.