19.8.6 Peripheral Camera In Exterior Mirror, Calibrating
NOTE:
- First perform the calibration requirements. Refer to 19.8.2 Requirements For Calibrating
- Then perform the preparation work for calibrating the peripheral camera. Refer to 19.8.5 Peripheral Camera In Exterior Mirror, Preparing For Calibration
- Connect the Vehicle Diagnostic Tester.
- In the Vehicle Diagnostic Tester, select "guided fault finding".
- Using the "Go to" button, select the "function/component selection" and the following menu options in sequence:
- Body
- Electrical Equipment
- OBD-capable systems
- 6C - Rearview camera system J928
- 6C - Rearview camera system, functions
- 6C - Coding the peripheral camera, (Repair Group 94)
From here, continue with the calibration on the Vehicle Diagnostic Tester.