Engine, Supporting In Installed Position: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Engine Support Bridge 10-222A
Spindle 10-222A/11
Adapter 10-222A/28
Support Bracket 10-222A/31
Rail with Holes T40091/2 from Engine Support Basic Set T40091
Mount T40093/5 from Engine Support Basic Set T40093
2 x Engine Support Adapter 10-222A/28-2
2 x Square Pipe T40091/1 from Engine Support Basic Set T40091
2 x Movable Joint T40091/3 from Engine Support Basic Set T40091
2 x Movable Joint T40093/4 from Engine Support Basic SetT40093
Special Hook 10-222A/20

Fig 1: Identifying Adapter 10-222 A/820
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench 5/50 Nm VAG1331

Fig 2: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tool Development

Fig 3: Identifying Measurements

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If the adapter 10-222A/4 does not have the indicated holes -arrow- shown they must be added.