Gearshift Cable and Selector Cable, Removing and Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
- Secure the shift cable and selector cable on the shift housing with lock washers -2 and 3-.
- Install the shift cable -1- on the gearshift lever and selector cable -4- on the selector lever inside the shift housing.
- Install the base plate with a new seal on the gearshift housing -arrows-. Refer to → Attach the Base Plate to the Gearshift Housing .
- Install the gearshift mechanism. Refer to → "SELECTOR MECHANISM, REMOVING AND INSTALLING " .
- Adjust the gearshift mechanism. Refer to →SELECTOR MECHANISM, ADJUSTING " "
.