Instrument Cluster, Replacement
WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, 2011 Volkswagen Jetta, and 2010 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Work procedure "replace instrument cluster" contains the following scope of work:
- If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module -J285- must be adjusted to the various equipment characteristics and corresponding version for that country.
- To adapt the integrated Anti-theft immobilize control module -J362- with the Engine Control Module -J623- (ECM), it is necessary to save the data from the engine control module in the replacement instrument cluster.
- Also, all ignition keys must be adapted after installation of a new instrument cluster.
Procedure
-- Connect the Vehicle diagnostic tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical Equipment
- 01 - On Board Diagnostic (OBD) capable systems
- Instrument Cluster
- Instrument cluster functions
- Instrument cluster, adaptation/replacing