Vehicle Electrical System Control Module -J519-, REPLACING
WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
The work procedure "replace the vehicle electrical system control module" contains the following scope of work:
- If a new Vehicle Electrical System Control Module -J519- is installed, it must be coded online.
- The factory mode in the Vehicle Electrical System Control Module -J519- is deactivated.
- All of the remote keys are programmed again.
The procedure to "replace the vehicle electrical system control module" can only be performed with the Vehicle Diagnostic Tester in the "guided fault finding" function.
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical Equipment
- 01 - OBD-capable systems
- 09 - vehicle electrical system control module
- Vehicle electrical system control module functions
- Replace the vehicle electrical system control module