A/C Compressor First Start
WARNING: This page is about a different car, the 2014 Volkswagen Jetta, 2013 Volkswagen Jetta, 2012 Volkswagen Jetta, and 2011 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If a new A/C compressor is installed, an "A/C compressor first start" must be performed.
The following conditions must be met:
- Filling with refrigerant on the pressure side. Refer to DRAINING AND FILLING (For 2.0L Engine) or DRAINING AND FILLING (For 2.5L Engine) .
- Engine off
- Vents set to "OFF".
- Blowers on "level 3"
- A/C System off.
-- Start the engine.
-- Wait about 5 seconds until the engine idle has stabilized.
-- Switch on the A/C.
-- Let the engine run idle for 2 minutes.
-- Turn off the engine.