Overview - Subframe Mount

WARNING: This page is about a different variant/trim than selected.

Fig 1: Engine Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Support engine in installed position when installing and removing

A ¹⁾ = 40 Nm + 90° additional turn.

B ¹⁾ = 60 Nm + 90° additional turn.

C ¹⁾ = 20 Nm + 90° additional turn.

¹⁾ replace

Fig 2: Identifying Transmission Assembly Mount & Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 ¹⁾ = 40 Nm + 90° additional turn.

2 ¹⁾ = 60 Nm + 90° additional turn.

¹⁾ replace

Fig 3: Pendulum Support

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A ¹⁾ = 50 Nm + 90° additional turn.

B ¹⁾ = 50 Nm + 90° additional turn.

C ¹⁾ = 100 Nm + 90° additional turn.

¹⁾ replace