Test Step 4 - Check the Liftgate Latch Release Driver Circuit for an Open Or High Resistance

Fig 1: Check the Liftgate Latch Release Driver Circuit for an Open Or High Resistance

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance of the liftgate latch release driver circuit between the power liftgate module C2 connector and the power liftgate latch connector.
• Wiggle the harness and check for an intermittent open condition.

Is the resistance less than 5.0 ohms?

Yes

• Go to Test Step 5 Test Step 5 - Check the Logic Ground Circuit for an Open Or High Resistance 

No

• Repair the liftgate latch release driver circuit for high resistance.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .