LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2014 >> Passat S, 1.8L Eng VIN S, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> 1.8L - Fuel Mixture Preparation, Fuel Injection - Engine Code(S): CPKA & CPRA >> 24 Fuel Mixture Preparation, Fuel Injection >> Removal And Installation >> Engine Control Module -J623- >> Engine Control Module -J623- WITH PROTECTIVE HOUSING >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module -J623- WITH PROTECTIVE HOUSING: Notes

Special tools and workshop equipment required 

NOTE:

If it is necessary to replace the engine control module, connect the Vehicle Diagnostic Tester and perform "Replace control module".

Shear bolts attach the protective housing. It is not possible to remove the shear bolts without damaging them. Use Axial Grinder VAS6682 or a cutting grinder to remove the shear bolts. Replace the protective housing if it gets damaged.

scientia non olet · About LEMON Manuals