Overview - Ignition System

Fig 1: Identifying Ignition System Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 20 Nm
- Tightening specifications affect function of knock sensor
Knock Sensor 1 -G61-
- Removing and installing, refer to Knock Sensor 1 -G61-, REMOVING AND INSTALLING .
Spark Plug
- Remove and install using the Spark Plug Removal Tool 3122B
- Tightening specification
- Replacement interval, refer to Maintenance Tables.
Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and installing, refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Bolt
- 8 Nm
Camshaft Position Sensor 3 -G300-
- Removing and installing, refer to Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING .
O-Ring
Bolt
- 8 Nm
Camshaft Position Sensor -G40-
- Removing and installing, refer to Camshaft Position Sensor -G40-, REMOVING AND INSTALLING .
O-Ring
- Replace if damaged
Sensor Wheel
- For Engine Speed Sensor -G28-
- Removing and installing, refer to Sealing Flange, Removing And Installing, Transmission Side .
Sealing Flange, Transmission Side
- Removing and installing, refer to Sealing Flange, Removing And Installing, Transmission Side .
Engine Speed Sensor -G28-
- Removing and installing, refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
Bolt
- 4.5 Nm