Electromechanical Steering Gear Assembly Overview

Fig 1: Identifying Electromechanical Steering Gear Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Electrical Wiring 
2. Universal Joint 
3. Bolt 
   • M8 x 35
   • 30 Nm
   • Always replace after removal.
4. Bolt 
   • 6 Nm
   • Self-tapping
5. Shield 
6. Power-Assisted Steering Gear 
   • With Power Steering Control Module -J500-
   • With Electromechanical Power Steering Motor -V187-
   • With Engine Speed (RPM) Sensor -G28-
   • With Steering Angle Sensor -G85-
   • With Steering Torque Sensor -G269-
   • Can be tested in Guided Fault Finding using the Vehicle diagnosis, testing and information system VAS 5051B
   • Removing and installing, refer to STEERING GEAR .
7. Left Wheel Bearing Housing 
8. Nut 
   • M12 x 1.5
   • 20 Nm + 90° turn
   • Self-locking
   • Always replace after removal.
9. Bolt 
   • 50 Nm + 90° turn
   • Always replace after removal.
10. Subframe 
11. Right Wheel Bearing Housing