Windshield Washer Fluid Level Sensor -G33-

NOTE:

Depending on equipment, the component location of the windshield washer fluid level sensor may deviate slightly from the illustrations. Removal is identical.

Removal

-- Switch off ignition, switch off all electrical consumers and remove ignition key.

Only GTI

-- Remove the front bumper cover. Refer to Front Bumper, GTI .

Continuation for all Vehicles

-- Disconnect the connector -1- from the windshield washer fluid level sensor.

Fig 1: Identifying Windshield Washer Fluid Level Sensor G33 And Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull windshield washer fluid level sensor -2- out of its rubber seal.

-- If necessary, collect the draining fluid in a suitable container.

Installation

Install in reverse order of removal, noting the following:

-- Bleed headlamp washer system after completing assembly work. Refer to HEADLAMP WASHER SYSTEM, BLEEDING .