Output Diagnostic Test Mode (DTM)
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It depends on the vehicle equipment whether the components and functions listed below can be checked.
The following components and functions can be checked via output Diagnostic Test Mode (DTM) of the Comfort System Central Control Module:
- Left Rear Entry Light -W33-
- Left Rear Central Locking Lock Unit -F222- (central locking of left rear door is activated)
- Right Rear Entry Light -W34-
- Right Rear Central Locking Lock Unit -F223- (central locking of right rear door is activated)
- Tank flap activation (tank flap is opened)
- Rear lid activation (rear lid is opened)
- Vehicle Inclination Sensor Indicator Lamp -K188- (LED) in Interior Monitoring Deactivation Switch -E267-
- Interior Monitoring -Off- Indicator Lamp -K162- (LED) in Deactivate Vehicle Inclination Sensor Button -E360-
- Alarm Horn -H12-
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .
-- On the vehicle diagnostic tester, select "Guided Fault Finding ".
-- Using the "GO TO " button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- 01 - On Board Diagnostic (OBD) capable systems
- Comfort system
- Functions - central control module for comfort system
- Comfort System Central Control Module -J393-, output Diagnostic Test Mode (DTM)