Instrument Cluster Output Diagnostic Test Mode
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
The following components and functions can be checked via output Diagnostic Test Mode (DTM) of instrument cluster:
- Speedometer -G21-
- Tachometer -G5-
- Fuel gauge -G1-
- Coolant temperature gauge -G3-
- Supply voltage display -Y11-
- Instantaneous consumption display -Y10-
- Charge air pressure gauge -G30-
- Glow plug indicator lamp -K29-
- Anti-Theft engine disable indicator light -K115-
- Seat belt indicator lamp -K19-
- Brake and parking brake warning lamp -K7-
- Brake pad wear indicator lamp -K32-
- Low windshield washer fluid level indicator lamp -K106-
- Low fuel level indicator lamp -K105-
- Oil pressure indicator lamp -K3-
- Oil Level Indicator Lamp -K38-
- Engine coolant level/temperature (ECL/ECT) warning lamp -K28-
- Oil pressure warning buzzer -H11-
- Warning buzzer -H3- (activation of gong in instrument cluster)
- Flasher acoustic (activation of flasher relay)
- Segment test (during segment test, all segments of display unit are activated. For this, the display will be activated in sequence in the colors white, red, green and blue.)
- Checkerboard pattern
- Inverted checkerboard pattern