Windshield Wiper System, Removing
WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench V.A.G 1331
- Pry Lever 80-200
- Puller T10369
-- Deactivate APP function. Refer to WIPER MOTOR ALTERNATING PARK POSITION FUNCTION, DEACTIVATING .
-- Let wiper run into rest position and then switch off ignition.
-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
CAUTION:
When disconnecting and connecting the battery, always perform the work procedure as described in BATTERY, DISCONNECTING AND CONNECTING .
Remove the plenum chamber cover. Refer to Removal and Installation .
Remove the wiper frame with linkage and windshield wiper motor. Refer to WIPER FRAME WITH LINKAGE AND WINDSHIELD WIPER MOTOR, REMOVING .