Anti-Theft Coding, Deactivating
-- Turn on the radio/navigation.
-- Enter the anti-theft code appearing in the display in the RNS 315 number block and confirm it.
Unit is enabled and ready for operation.
If the wrong radio code number was entered when overriding the electronic lock, first "SAFE" blinks in the display and "1000" appears again. The entire process may be repeated one more time. The number of tries is shown in the display. The unit will lock for approximately one hour if an incorrect code is entered again. That mean, it cannot be used. This lock is indicated by the word "SAFE" appearing continuously in the display. After one hour has elapsed in which the unit and the ignition must be switched on, the number of attempts disappears and the electronic lock can be deactivated again as described above. The cycle >>two tries, locked for one hour<< still applies.