Vehicle Electrical System Control Module -J519- FUNCTION: Notes
The Vehicle Electrical System Control Module -J519- has the following functions:
- Electric load management/exterior lighting control
- Turn signal control
- Windshield wiper and washer system windshield
- For coding the Rain/Light Recognition Sensor -G397-, refer to Vehicle Electrical System Control Module -J519- FUNCTION
- Rear window defogger
- Interior light control
- Terminal control
- Dimming, instrument illumination
- Footwell lamps
- Fuel Pump (FP) supply
- Pre-energizing of Generator
- Horn
- Warning lamp
- Release control
- Control central locking
- Door control module activation
- Rear lid remote unlock activation
- Fuel tank unlock activation
- Anti-theft alarm system activation
- Anti-theft immobilizer activation
- Start authorization activation
- Acoustic acknowledgment when unlocking
- Acoustic acknowledgment when locking, adapting
- Blinking cycle during comfort blinking, adapting
- Automatic unlocking when key removed, adapting
- Programming automatic locking at 15 km/h (9 mph)
- Comfort locking confirmation, adapting
- Adapting coming home time
- Adapting leaving home time
- Anti-theft alarm delay when opening driver door, adapting
- Single door opening, adapting
- Factory mode, deactivating, refer to Vehicle Electrical System Control Module -J519- FUNCTION
- Footwell illumination intensity, adapting
- Comfort operation via Radio-frequency remote, adapting
- Intelligent alarm horn market version, adapting
- Visual acknowledgment for locking, adapting
- Remote control key, adapting refer to Vehicle Electrical System Control Module -J519- FUNCTION
- Ignition key with Radio-frequency remote control, checking, refer to Vehicle Electrical System Control Module -J519- FUNCTION
- Output diagnostic test Vehicle Electrical System Control Module -J519-, refer to Vehicle Electrical System Control Module -J519- FUNCTION
- Coding Wiper Motor Control Module -J400- /deactivating alternating park position function
- Vehicle Electrical System Control Module -J519-, coding, refer to Vehicle Electrical System Control Module -J519- FUNCTION
It depends on the vehicle equipment whether the adaptations listed above can be performed.
If it is necessary to replace the Vehicle Electrical System Control Module -J519-, then it is necessary to code the Vehicle Electrical System Control Module -J519- in order to be able to read the codes stored in it, refer to Vehicle Electrical System Control Module -J519- FUNCTION .