Vehicle Electrical System Control Module -J519-, Adapting Functions
WARNING: This page is about a different variant/trim than selected.
The following functions for the Vehicle Electrical System Control Module -J519- can be performed using the Vehicle Diagnostic Tester in "Guided Fault Finding" :
- Output diagnostic test mode (D) of Vehicle Electrical System Control Module -J519-
- Vehicle Electrical System Control Module -J519-, Coding
- Factory mode, deactivating.
- Remote control key, adapting.
- Ignition key with Radio-frequency remote control, checking.
- Rain/Light Recognition Sensor -G397-, coding.
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical system interior/exterior
- 01 - On Board Diagnostic (OBD)
- 09 - Vehicle Electrical System Control Module
- 09 - Functions
- Select the desired function