Windshield Wiper System Overview
WARNING: This page is about a different variant/trim than selected.
- Joint-Free Windshield Wiper
- Removal and installation, refer to WIPER BLADE, REPLACING
- Park position, adjusting, refer to WINDSHIELD WIPER ARMS, ADJUSTING
- Wiper Arms
- Removal and installation, refer to WINDSHIELD WIPER ARM
- Service position, refer to WIPER, MOVING INTO SERVICE POSITION
- Nut
- 20 Nm
- Quantity: 2
- Nut
- 5 Nm
- Bolt
- 8 Nm
- Quantity: 2
- Wiper Frame with Linkage
- Removal and installation, refer to WIPER FRAME WITH LINKAGE AND WINDSHIELD WIPER MOTOR -V-
- Windshield Wiper Motor -V- With Wiper Motor Control Module -J400-
- Removal and installation, refer to WINDSHIELD WIPER MOTOR -V-
- Wiper Motor Control Module -J400- coding/deactivating the alternating park position function, refer to WIPER MOTOR ALTERNATING PARK POSITION FUNCTION, DEACTIVATING
No Illustration
- Windshield Wiper Motor -V- bolts for the wiper frame with linkage: 8 Nm
- Windshield Wiper Motor crank to Windshield Wiper Motor shaft: 18 Nm