Accelerator Pedal Module

Special tools and workshop equipment required

Removing

-- Remove the steering column cover retainers -arrows- and cover.

Fig 1: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry out the cap -3- using a screwdriver.

Fig 2: Identifying Accelerator Pedal Module, Connectors & Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Disconnect the connector -1- (5-pin) VAS from the accelerator pedal module.

-- Using the release tool T10238, insert it all the way as shown into the openings provided and remove the accelerator pedal module.

Fig 3: Identifying Release Tool T10238

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing

-- Connect the connector -1- to the accelerator pedal module -4-. Lock the connector -arrow-.

Fig 4: Identifying Accelerator Pedal Module, Connectors & Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the accelerator pedal module onto the studs -5-.

-- Insert the centering pin -6- into the hole in the floor panel.

-- Tighten the bolt -2- to secure the accelerator pedal module and replace the cap -3-.

-- Install the steering column cover and retainers -arrows-.

Fig 5: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tightening Specification

Component		Nm
Accelerator pedal module to body		10