Refrigerant Circuit: Condenser: Installing
WARNING: This page is about a different variant/trim than selected.
Installation is carried out in the reverse order while observing the following:
- Coat the new refrigerant line sealing rings with refrigerant oil before installing.
NOTE:
If the condenser was replaced, only open the caps on the condenser-block connection prior to installation.
Only remove the caps from the Engine Bung Set VAS 6122 from the refrigerant lines just prior to installation.
Installation is carried out in the reverse order while observing the following:
- Coat the new refrigerant line sealing rings with refrigerant oil before installing.
NOTE:
If the condenser was replaced, only open the caps on the condenser-block connection prior to installation.
Only remove the caps from the Engine Bung Set VAS 6122 from the refrigerant lines just prior to installation.